Level Home Improvements Products
 
 

POLYMER SUNROOMS & SUN KIT FAQ

  1. Are Polymer Sunrooms & Sun kits 3 seasons or 4 seasons?
  2. What are the Sunrooms & Sun Kits made of?
  3. Where are the Sunrooms & sun kits manufactured?
  4. Can we use the Sunrooms & sun kits in the winter?
  5. How much snow load will the unit handle?
  6. What aluminum frame colours are available?
  7. How hot will it get inside my sun kit in the summer?
  8. Are screen kits included with my Sunroom or sun kit?
  9. Can I get a Sunroom or sun kit that is not a standard size?
  10. Do I need a permit to install a Sunroom or sun kit, gazebo or wind screen?
  11. Can I install a Sunroom or sun kit on my second floor deck?
  12. I have a soffit style roof, could we build a sun kit to fit under it?
  13. I would like a sunroom or sun kit that is fully enclosed plus an opened terrace; can we do that?
  14. Will the polymer panels fade or discolour?
  15. How long of a warranty to I receive?

 

Are Polymer Sunrooms & Sun kits 3 seasons or 4 seasons?

Our Polymer Sunrooms and Sun kits are classified as 3 seasons.  They require an exterior wall between the interior of the home or business and the sunroom sun kit structure.

 

What are the Sunrooms & Sun Kits made of?

The frame of each sunroom and sun kit is made from an exclusive 6063 T5 aluminum extrusion and covered with a durable electrostatic Duracon finish.  Standard model frame thickness is (1 3/8” x 1 3/8”).  Our VP signature sunroom sun kits boast an impressive 3” x 1 3/8” thickness making them extremely strong yet still very light.

Each polymer panel is made of a proprietary granular formula and patented seam fusion technology providing incredible strength and elasticity while keeping weight and price per panel to a minimum. 

 

Where are the sunrooms & sun kits manufactured?

Our polymer sunrooms, sun kits and products are 100% handmade in Canada and manufactured by PolySunKit, an established and reputable company located near Montreal, Quebec. More than 25,000 units have been produced since 1999. 

Level Home Improvements proudly became the first PolySunKit authorized retailer outside of Quebec in March 2014. Many other retailers are coming and these innovative products will soon be represented all over Canada.

 

Can we use the sunrooms and sun kits in the winter?

Yes.  Each polymer panel is rated to perform down to -34 degrees Celsius and below. Although they are classified as 3 season, you may decide to heat the unit while you are using it with a portable space heater or patio heater.  In some custom installations an electric fireplace or even a wood burning stove could be installed given they are kept at a proper distance from the polymer panels.  In the case of a wood burning stove with a stack, the roof panel would need to be modified with an aluminum/metal sheet so that the stack is not directly in contact with the polymer. The polymer panels are non-flammable and their melting point temperature goes up to 184 degrees Celsius.

 

How much snow load will the unit handle?

Our Sunrooms and Sun Kits are designed and developed in Montreal, Canada with the winter in mind. Each polymer panel has been tested and certified using the following standards:
Certified test ASTM D368 Stretching: + 390%
Certified test ASTM D624 Resistance: + 490 lbs/sq.in.
Certified test ASTM D638 Mechanical tension 1680 psi
Certified test ASTM D746 Thermal resistance -34 °C

With our standard models (SO and SB) we highly recommend the use of winter supports (included with each kit) if the unit is unattended over the winter or when severe amounts of snow are expected and nobody is available to clear the snow on a regular basis. 

Free standing Gazebos also come with winter supports but are optional.

Our VP signature Sunroom Sun kit is capable of handling very heavy snow loads due to its thicker 3” aluminum extrusion.   VP Signature Sunroom sun kits do not require winter supports.
Basement entrance models are only 4.5ft deep and do not require any winter supports.

 

What aluminum frame colours are available?

Currently our standard models (SO, SB, wind breakers and basement entrances) come in two frame colours, white and sand.

VP Signature model and the VG Gazebo series are available in sand.

Fences and railings come in white, sand and black.

Polymer panels are available in two colours, clear smoke and tinted charcoal.

 

How hot will it get inside my sunroom or sun kit in the summer?

Heat within the sunroom sun kit would be comparable to any room and subject to the outside temperature.  Our sunrooms and sun kits come standard with 100% UV protected tinted roof panels to help reduce the amount of direct sunlight let in. 

Optional accessories could also be installed such as retractable sun shades to provide full shade within each unit.  In addition to sun shades, each unit could be fitted with any number of screen kits (27” x 36”), where applicable, which allows for the polymer panel to be easily opened or completely removed to provide maximum air circulation while providing shelter from insects.

 

Are screen kits included with my sun kit?
Yes.  All standard and VP polymer sunrooms & sun kits come standard with one 30” screened sliding door and a minimum of 2 screen kits (27” x 36” sizes only).  Additional sliding screened doors are also available.  Please refer to the chart below for more information on # screen kits per unit. 

STANDARD MODELS (SO & SB SERIES)

DEPTH

WIDTH

# of SCREENS

6’ – 16’

8’ – 12’

2

6’ – 16’

14’ – 24’

3

6’ – 16’

26’ – 30’

4

18’ – 20’

10’ – 20’

3

18’ – 20’

24’ – 26’

4

18’ – 20’

28’ – 30’

5

*ONLY STANDARD SIZES SHOWN
Additional (27” x 36”) screen kits for standard models are available for a small additional cost.

VP SIGNATURE MODELS (VP SERIES)

DEPTH

WIDTH

# of SCREENS

8’ – 14’

8’ – 12’

2

8’ – 14’

14’ – 30’

3

*ONLY STANDARD SIZES SHOWN
Additional (27” x 65”) front panel screen kits for VP Signature models are available for an additional cost.

VG GAZEBO MODELS (VG SERIES)

SIZE

# of SCREENS

11’ x 11’

4

11’ x 14’

4

11’ x 17’

4

*ONLY STANDARD SIZES SHOWN
Additional (27” x 73”) screen kits for VG Gazebo models are available for an additional cost.

BASEMENT ENTRANCE MODELS (DSS SERIES)

WIDTH

# of SCREENS

7’ – 16’

1

19’- 24’

2

26’ x 30’

3

*ONLY STANDARD SIZES SHOWN
Additional (27” x 36”) screen kits for basement entrance models are available for an additional cost.

Basement entrance models are available with 30” screened swing door only which opens to the outside because depth of unit will not allow for a regular 30” sliding door to fit.

 

Can I get a Sunroom sun kit that is not a standard size?

Yes.  Although all of our sunrooms and sun kits come in many standard sizes, each could be customized to your exact specifications.  Prior to manufacturing we begin by measuring your space and our professional 3D artists and engineers will create a 3D plan based on those measurements.

The height, width and depth of any standard unit could be modified to perfectly fit your home or business.  These custom modified projects need to be cleared and approved by our engineering department to ensure they are manufactured to pass all building codes.

 

Do I need a permit to install a sunroom, sun kit, gazebo or wind screen?

Yes.  As with almost every type of home renovation that increases the value of your home from moving a sink to installing a deck in the backyard requires a permit.  It does vary by municipality and the best thing to do is contact your local city hall and ask.  Our sunrooms & sun kits are classified as 3 season which do not require heating, wiring or foundations to be installed so getting permit to install one of our sunrooms & sun kits is fairly easy. 

We will also provide you with a certificate or engineering stamp that confirms that each sunroom sun kit is manufactured to conform to the build code in Ontario.  In some instances we could apply for the permit on your behalf if we are doing the installation for you.  All our sun kits are DIY projects that come pre-manufactured and cut to size, labelled and with full step by step instructions. 

 

Can I install a sunroom or sun kit on my second floor deck?

Yes.  Our Sunrooms and sun kits are made of 6063 T5 aluminum and flexible polymer panels that when combined are very light and extremely strong.  You could install our polymer sunrooms & sun kits on any existing deck ensuring that the surface is levelled without having to upgrade or install additional foundations, considering your existing deck or surface was built to code.

 

I have a soffit style roof, could we build a sunroom sun kit to fit under it?

Yes.  Our standard models come in either regular profile or low profile to make it easier to fit to most common heights.  In addition to these profiles and if required, we could raise or lower the sunroom or sun kit to perfectly fit the height you have available.  Such modifications will change the final cost of each unit.

 

I would like a sunroom sun kit that is fully enclosed plus an opened terrace; can we do that?

Yes.  You would then order a sunroom sun kit along with a terrace that perfectly matching in style and color.  This setup provides a unique space that is fully sheltered from the elements and insects and an opened adjoining space sheltered from the rain, snow or sun.  Great solution for those who enjoy BBQ all year round and eating bug free!

 

Will the polymer panels fade or discolour?

Our exclusive and unique polymer panels come with a Pro-Rata warranty of 5 years.  With proper care and maintenance they will easily extend that time. We recommend periodic cleaning and avoiding unwanted abuse to extend the life length of each panel.  Polymer panels are also non-flammable and resistant to molds.

 

How long of a warranty to I receive?

All of our products is covered by a Pro-Rata warranty.  Polymer panels are covered for 5 years and the aluminum frame is covered for 10 years.